Green Sky Adventures, Inc.    of North Central Florida
  352 475-5625         or   Email
US and International Shipping Charges can be viewed HERE
Current June 2016
FUEL LINE
1/4 X  3/8 HEAVY WALL POLY URETHANE TUBING  FUEL / IMPULSE LINE as Low as $.94/ft
Data Sheet 
LENGTH

PRIMER LINE HEAVY WALL
POLY URETHANE TUBING 1/8 X 1/4 As Low as $.44/ft
LENGTH

3/16 ID X 5/16 OD POLYURETHANE $1.25/ft
LENGTH

FUEL INJECTION LINE
GATES 5/16 ID (7.9MM) 225 PSI 
MULTI FUEL and BIO-FUEL COMPATIBLE
LENGTH
Herbie Clips $..95 EA.   $.71 EA 10 Pk
These Double Grip Nylon Clamps are handy in certain close quarter and many other situations. 
Size requirements vary with tube OD, and application on HKS, and Rotax. These are commonly used at carb fuel inlet, impulse fittings, fuel pump fittings, etc  When used with FLEX PolyUrethane Tubing at left:
Size AA works well on our 3/16th inch Vent Line for Float Chamber Vent replacement on Bing Model 54, and 64 Carburetors.
Size B works on 1/4" FLEX tubing on Mikuni fuel pump inlets outlets, engine impulse fittings, and the fuel inlet of Bing Model 64 CV Carburetors. Size B is also appropriate for clamping 3/16 FLEX line when used as coolant vent on Rotax 582 cylinder heads, and at the low pressure source connection associated with HACman installations,
Size BB works on 1/4" FLEX tubing at the fuel inlet on Bing Model 54 Carburetors.

NYLON DOUBLE GRIP CLAMP  sizes AA 3/16"+; B 1/4"-; BB 1/4"; C 1/4"+; 

PER EACH OR 10-PAK
SELECT SIZE

BARBED TEE TUBE FITTING (POLYPROPYLENE)
PER EACH OR 10 PAK
SELECT SIZE

TUBE COUPLING NYLON BARBED
PER EACH OR 10 PAK
SELECT SIZE