Cable and Housing

Cable End Fittings

Junction and Adjusters

03090 - 7x7 .049 Galvanized.  Works with 03315 Nylon Lined Housing. Very low friction. Best in short runs.

Quantity

03110 - 7x7 .064 Galvanized. Works with 03315 Nylon Lined Housing. Tighter Fit for more precise control. Recommended for long runs.

24762 Carburetor or Junction Block Fitting  Works with .049" or .064" cable, O.D. .126”  length .163”

Quanity

29004 Junction Block Joins control cables for 2, 3, or 4 out puts from one input. 45mm available travel.

Quanity
Quantity

03130 - 7x7 .093  (2.36mm) Galvanized. Works with 03335 Nylon Lined Housing. Use for Brake, Clutch, or Other Custom Applications. More flexible than 1x19 sold below.

Quantity

24062 Solder Ball - Works with .049" or best with .064” Cable  03090 or 03110, O.D. .250”

Quanity

24156 Solder Ball - Works with .049" or .064” Cable  03090 or 03110, O.D. .160” fits Barrel End Fitting 25362

Quanity

27286 8mm x 1.25 adjuster. Threaded Length is 1.5 inches. Use with 03335 Housing WITHOUT Ferrule.

Quanity

27266 6mm x 1 Plated Steel Adjuster. Thread length is 1 inch. Adjuster can be reamed to allow 24762 Carb/Junction Block fitting to slide through.

03140 - 1x19 .100  (2.5mm) Galvanized. Works with 03335 Nylon Lined Housing. Less flexible than 03130 above. Can be used for moderate pushing motion. Also for Brake, Clutch, or Other Custom Applications.

Quanity

03315 Nylon Lined Housing .213 OD.  Use with .049 Cable for Low Friction Short Runs, or .064 Cable for more precise control and longer runs

Quanity

03335  Nylon Lined Housing .268 OD. Use with .093 and .100 Cable.

Quanity

20220 Ferrule  Fits 03315 Housing .212 ID .250 OD. $1.04 each. (Plastic Cover of Housing may require dressing.)

Quanity

24162 Solder Ball - Works with .049" or .064” Cable 03090 or 03110, O.D. .216”, must be dressed to fit with various Barrel End Fittings such as 2362, 2365, or 25480.

Quanity

24187 Solder Ball - Works with .049" or .064” Cable  03090 or 03110, BUT MUST BE DRILLED OUT FOR USE WITH .064" CABLE. O.D. .188” Excellent fit for 2362, or 2365, Barrel Fittings.

Quanity

2362 Barrel Fitting.  Use in conjunction with 24187 Ball. OD .250 inch x .370 inch length

2365 Barrel Fitting.  Use in conjunction with 24187 Ball. OD .250 inch x .250 inch length

 

25362   Barrel end fitting drilled for .064” Cable, O.D. .236” (6mm), length .275” (7mm) Use with Ball Fitting 24156.

Quanity

29520 Plated Steel Midway Adjuster. M6X.1Jam Nuts will work. Threaded portion is 37 mm (1.456 "). Secures to Housing 03315 via 20220 Ferrule.

Quanity

Adjuster 29315 Aluminum. Dress OD of 03315 Cable Housing for Bonding. Thread length .750 inches. Thread diameter M6X.75   Order Nuts Separately.

Quanity

Dust Boot 260-370. This is stock Bing part used at the standard straight adjuster on top of many Bing carburetors. For extended life, apply Dow no. 4 or other silicone dielectric compound.

$5.08 each.

20400 Ferrule  Fits 03335 Housing .268 ID .346 OD.  (Plastic Cover of Housing may require dressing.)

Quanity

21710  Stepped down ferrule, .212”ID  (5.5mm)  (for housing 03315), O.D. .250” (6.35mm), length .787” (20mm), minor diameter .222” (5.6mm), reduced length .350” (8.9mm).

Quanity

23200      Barrel end fitting to be used with 24162 solder ball. O.D. .268” (6.8mm), length .360” (9.12mm).

26080 Shanked end fitting for use with 25480 barrel fitting, can be used with .049" or .064" Cable, O.D. .219” (5.6mm), length .390” (9.9mm), shank diameter .126” (3.2mm). May also be used with -2 and -3 Strap Forks and Eyes

26398  Shanked end fitting. Can be used with .100" or .080" Cable, O.D..250” (6.35mm), length .425” (10.8mm), shank diameter .151” Can be used with -2 and -3 Strap Forks and Eyes

 

Dust Boot 960-550. Larger than 260-370. Use with 27286 and 29302 adjusters.

$4.05 EACH.

 

© Copyright 2018 GSA Tech LLC. All Rights Reserved.