Green Sky Adventures, Inc. HOME
  Ph 352 475-5625         Cell 352 318-5625    or Email  mail@greenskyadventures.com
Engines
Instruments
Propellers
Micro Mong
Zippy Sport

 

 

Throttle Cable Parts
Cable

7x7 .049 Galvanized.  Works with 03315 Nylon Lined Housing. Very low friction. Best in short runs.
03090      7x7 .049 Cable              1 - 24 Ft.      $.69 Per Ft
03090-25 7x7 .049 Cable           25 ft. $13.00   $.52 Per Ft.
03090-50 7x7 .049 Cable           50 ft. $20.50   $.41 Per Ft
Qnty


7x7 .064 Galvanized. Works with 03315 Nylon Lined Housing. Tighter Fit for more precise control. Recommended for long runs
03110      7x7 .064 Cable             1 - 24 Ft.      $.75 Per Ft
03110-25 7x7 .064 Cable           25 ft. $14.00  $.56 Per Ft
03110-50 7x7 .064 Cable           50 ft  $22.50  $.45 Per Ft
Qnty


7x7 .093  (2.36mm) Galvanized. Works with 03335 Nylon Lined Housing. Use for Brake, Clutch, or Other Custom Applications. More flexible than 1x19 sold below.
03130       7x7 .093 Cable            1 - 24 Ft      $..56 Per Ft
03130-25 7x7 .093 Cable           25 ft $10.50  $.42 Per Ft
03130-50 7x7 .093 Cable           50 ft $17.00  $.34 Per Ft
Qnty


1x19 .100  (2.5mm) Galvanized. Works with 03335 Nylon Lined Housing. Less flexible than 03130 above. Can be used for moderate pushing motion. Also for Brake, Clutch, or Other Custom Applications
03140       1x19 .100 Cable            1 - 24 Ft      $.61 Per Ft
03140-25 1x19 .100 Cable           25 ft $11.50  $.46 Per Ft
03140-50 1x19 .100 Cable           50 ft $18.50  $.37 Per Ft
Qnty

Housing

Low Friction Nylon Lined Cable Housing. Rectangular chrome steel wire core with nylon inner liner and abrasion resistant plastic cover
03315 Nylon Lined Housing .213 OD.  Use with .049 Cable for Low Friction Short Runs, or .064 Cable for more precise control and longer runs
03315      .213 OD Nylon Lined Housing         1 - 24 FT     $1.44 Per Ft
03315-25 .213 OD Nylon Lined Housing       25 Ft $27.00  $1.08 Per Ft
03315-50 .213 OD Nylon Lined Housing       50 Ft $43.00  $.86 Per Ft

Qnty


03335  Nylon Lined Housing .268 OD. Use with .100 Cable
03335       .268 Nylon Lined Housing        1 - 24  Ft    .$2.31 Per Ft
03335-25 .268  Nylon Lined Housing     25 Ft $43.25  $1.73 Per Ft
03335-50 .268  Nylon Lined Housing     50 Ft $69.50  $1.39 Per Ft
Qnty

Ferrules

20220 Ferrule  Fits 03315 Housing .212 ID .250 OD. $1.04 each. Crimp or Bond (Plastic Cover of Housing may require dressing.)
20220      Ferrule  Fits 03315 Housing .212 ID .250 OD.                         $1.04 each.
20220-5   Ferrule  Fits 03315 Housing .212 ID .250 OD.   5 PK $3.90     $.78 each
20220-10 Ferrule  Fits 03315 Housing .212 ID .250 OD. 10 PK $7.00     $.70 each
20220-25 Ferrule  Fits 03315 Housing .212 ID .250 OD. 25 PK $15.50   $.62 each 

Qnty


 


20400 Ferrule  Fits 03335 Housing .268 ID .346 OD.  Length .519” $1.12 each
20400-5   Ferrule  Fits 03315 Housing .268 ID .346 OD. 5 PK  $4.20   $.84 each
20400-10 Ferrule  Fits 03315 Housing .268 ID .346 OD. 10 PK $7.50   $.75 each
20400-25 Ferrule  Fits 03315 Housing .268 ID .346 OD. 25 PK $16.75   $.67 each

Qnty


Stepped Ferrule
21710  Stepped down ferrule, .212”ID  (5.5mm)  (for housing 03315), O.D. .250” (6.35mm), length .787” (20mm), minor diameter .222” (5.6mm), reduced length .350” (8.9mm).
21710       Stepped Ferrule for 03315 Housing  $1.33 each
21710-5   Stepped Ferrule for 03315 Housing 5PK   $5.30   $1.06 each
21710-10 Stepped Ferrule for 03315 Housing  10PK $9.30  $.93 each
21710-25 Stepped Ferrule for 03315 Housing  25PK $20.00 $.80 each

Qnty

2380 Housing Clamp
    
This clamp is a good fit for our 03315 Nylon Lined Housing.  Secure control cables operate more precisely. If housings are flopping around in the breeze, control setting is constantly variable, and all contact points of the cable assembly are wearing.  $1.32 each. Order a 10Pk and save 33%

2380        Housing Clamp for 03315 Housing                                    $1.32 each
2380-5     Housing Clamp for 03315 Housing           5PK  $4.95      $.99 each
2380-10   Housing Clamp for 03315 Housing         10PK  $8.80      $.88 each
2380-25   Housing Clamp for 03315 Housing         25PK  $19.75    $.79 each 

Qnty

Solder Fittings


24062 Solder Ball

24062 Solder Ball - Works with .049" or best with .064” Cable  03090 or 03110, O.D. .250”
24062       .250" Solder Ball $1.11 each
24062-5    Solder Ball 5PK $4.70  $.94 each
24062-10  Solder Ball 10PK $8.30  $.83 each
24062-25  Solder Ball 25PK $18.50  $.74 each
Qnty

24156 Solder Ball

24156 Solder Ball - Works with .049" or .064” Cable  03090 or 03110, O.D. .160” fits Barrel End Fitting 25362,
24156       Solder Ball $.92 each
24156-5    Solder Ball 5PK $3.45  $.69 each
24156-10  Solder Ball 10PK $6.200  $.62 each
24156-25  Solder Ball 25PK $13.75  $.55 each
Qnty

24162 Solder Ball

24162 Solder Ball - Works with .049" or .064” Cable  03090 or 03110, O.D. .216” can (must) be dressed to fit with various Barrel End Fittings such as 2362, 2365, or 25480,
24162       Solder Ball $.92 each
24162-5    Solder Ball 5PK $3.45  $.69 each
24162-10  Solder Ball 10PK $6.20  $.62 each
24162-25  Solder Ball 25PK $13.75  $.55 each
Qnty

24187 Solder Ball

24187 Solder Ball - Works with .049" or .064” Cable  03090 or 03110, BUT MUST BE DRILLED OUT FOR USE WITH .064" CABLE. O.D. .188” Excellent fit for 2362, or 2365, Barrel Fittings
24187       Solder Ball $1.02 each
24187-5    Solder Ball 5PK $3.85  $.77 each
24187-10  Solder Ball 10PK $6.80  $.68 each
24187-25  Solder Ball 25PK $15.25  $.61 each
Qnty

2362 Barrel Fitting

2362 Barrel Fitting.  Use in conjunction with 24187 Ball. OD .250 inch x .370 inch length
2362       Barrel Fitting                              $1.28 each
2362-5    Barrel Fitting      5 PK  $4.80      $.96 each
2362-10  Barrel Fitting     10PK  $8.70      $.87 each
2362-25  Barrel Fitting     25PK  $19.25    $.77 each
Qnty

2365 Barrel Fitting

2365 Barrel Fitting.  Use in conjunction with 24187 Ball. OD .250 inch x .250 inch length
2365       Barrel Fitting                                  $.96 each
2365-5    Barrel Fitting      5 PK    $3.60      $.72 each
2365-10  Barrel Fitting     10PK    $6.50      $.65 each
2365-25  Barrel Fitting     25PK  $14.50      $.58 each
Qnty

25362 Barrel Fitting


25362   Barrel end fitting drilled for .064” Cable, O.D. .236” (6mm), length .275” (7mm) Use with Ball Fitting 24156.
25362        Barrel end fitting                       $1.12   each
25362-5     Barrel end fitting    5PK  $5.20  $.84   each
25362-10   Barrel end fitting 10PK   $7.60  $.76   each
25362-25   Barrel end fitting 25PK $16.75  $.67   each 

Qnty

25480 Barrel Fitting


25480   Barrel end fitting to be used with 26080 solder on shank fitting, O.D. .312” (7.9mm), length .378” (9.6mm).
25480   Barrel end fitting   $1.14 each
25480-5   Barrel end fitting       5PK $4.30  $.86 each
25480-10   Barrel end fitting   10PK $7.80  $.78 each
25480-25   Barrel end fitting 25PK $17.00  $.68 each

Qnty

23200 Barrel Fitting

23200      Barrel end fitting to be used with 24162 solder ball. O.D. .268” (6.8mm), length .360” (9.12mm).
23200       Barrel end fitting   $1.13 each
23200-5   Barrel end fitting  5PK       $ 4.25    $.85 each
23200-10 Barrel end fitting 10 PK     $ 7.60    $.76 each
23200-25 Barrel end fitting 25 PK     $17.00   $.68 each
Qnty


26080 Shanked end fitting for use with 25480 barrel fitting, can be used with .049" or .064" Cable, O.D. .219” (5.6mm), length .390” (9.9mm), shank diameter .126” (3.2mm). May also be used with -2 and -3 Strap Forks and Eyes
26080   Shanked end fitting                               $1.02 each
26080-5     Shanked end fitting  5PK    $3.85   $.77 each
26080-10   Shanked end fitting 10PK   $6.90   $.69 each
26080-25   Shanked end fitting 25PK $15.25   $.61 each

Qnty


26398  Shanked end fitting. Can be used with .100" or .080" Cable, O.D..250” (6.35mm), length .425” (10.8mm), shank diameter .151” Can be used with -2 and -3 Strap Forks and Eyes
26398       Shanked end fitting                             $1.02 each
26398-5   Shanked end fitting    5PK    $3.85     $.77 each
26398-10 Shanked end fitting  10PK    $6.90     $.69 each
26398-25 Shanked end fitting  25PK    $15.25   $.61 each 

Qnty


24762 Carburetor or Junction Block Fitting  Works with .049" or .064" cable, O.D. .126”  length .163”
24762       Carb-Junction Block Fitting. $.93 each
24762-5   Carb-Junction Block Fitting.   5PK $3.50    $.70 each
24762-10 Carb-Junction Block Fitting. 10PK $6.30    $.63 each
24762-25 Carb-Junction Block Fitting. 25PK $14.00  $.56 each

Qnty

Splitter - Junction Block         
MORE INFO
29003 Junction Block Joins control cables for 2, 3, or 4 out puts from one input. 45mm available travel. $14.17 each
29003        Junction Block                           $14.17 each
29003-5    Junction Block  5 PK    $56.70     $11.34 each
29003-10  Junction Block 10PK      $99.20     $9.92 each
29003-25  Junction Block 25PK      $212.50   $8.50 each
Qnty

Junction Block Options
Tapped Input End - 6m x .1 or 5/16 - 24                                $5.00 each
Ream 27266 to accommodate Junction Block fitting 24762     $2.50 each
HKS angle tab. With above two options, this allows
mounting of Junction Block to HKS oil pump Housing.
5/8 inch .080 4130 steel, Primed. Non Precision Part.              $6.00 each. 
Adjusters


241-440 adjuster.
6mm x .75 Thread. Stock Item on Bing 54 Carburetor. Use with 260=370 boot
241-440   6mm adjuster with nut                        $8.40 each

Dust Boot 260 370
 
Use with all but the 27431 5/16 adjuster.  This is stock Bing part used at the standard straight adjuster on top of many Bing carburetors. For extended life, apply Dow no. 4 or other silicone dielectric compound.
$5.08 ea; 10 PK $4.32 ea; $43.20.
Qnty

Dust Boot 960 550

Use for 27431 5/16 adjuster. Can also be used with 27266 adjuster, but requires clamping.  This is the standard dust boot on the Green Sky Adventures, Inc. HKS throttle cable sets with 90 degree adjusters.  Note, weathers better than 260 370 dust boot.
$4.05 each



27286 8mm x 1.25 adjuster. Threaded Length = 1.5 inches. Use with 03335 Housing WITHOUT Ferrule. Compatible with 960 550 Dust Boot
27286       8mm adjuster with two nuts                        $7.01 each
27286-5   8mm adjuster with two nuts   5PK  $26.30    $5.26 each
27286-10 8mm adjuster with two nuts 10PK   $47.00   $4.70 each
27286-25 8mm adjuster with two nuts 25PK  $105.25   $4.21 each
Qnty


27266 6mm x 1 Plated Steel Adjuster     MORE INFO
Mate to 03315 Cable Housing via 20220 Ferrule, 960 550 Dust Boot , and Double Grip Nylon Clamps (one -K63 and one -k65)
Comes with two M6 x .1 Nuts. Thread length 1 inch
NOTE: Adjuster can be reamed to allow 24762 Carb/Junction Block fitting to slide through. See Junction Block Options above.
27266       6mm x 1 inch straight adjuster with two nuts.                        $4.91 each
27266-5   6mm x 1 inch straight adjuster with two nuts.  5PK  $18.40     $3.68 each
27266-10 6mm x 1 inch straight adjuster with two nuts  10PK $32.90     $3.29 each
27266-25 6mm x 1 inch straight adjuster with two nuts  25PK $73.75     $2.95 each

Qnty



29520 Plated Steel Midway Adjuster. M6X.1Jam Nuts will work. Threaded portion is 37 mm (1.456 ")
can be used alone for long straight adjuster. Secures to Housing 03315 via 20220 Ferrule and 260 370 Dust Boot
29520       Midway Adjuster each                    $7.76 each
29520-5    Midway Adjuster 5PK    $29.10    $5.82 each
29520-10  Midway Adjuster 10PK  $52.80    $5.28 each
29520-25  Midway Adjuster 25PK  $116.50  $4.66 each

Qnty


Adjuster 29315 Aluminum          MORE INFO
Dress OD of 03315 Cable Housing for Bonding.
Use with Dust Boot 260 370. Thread length .750 inches.  Thread diameter M6X.75   Order Nuts Separately
29315        6mm Straight bonded adjuster                           $3.54 each
29315-5    6mm Straight bonded adjuster    5PK  $13.25    $2.65 each
29315-10  6mm Straight bonded adjuster  10PK  $23.70   $2.37 each
29315-25  6mm Straight bonded adjuster  25PK  $53.00   $2.12 each

Qnty

Ninety Degree Swivel Adjuster 29302A (replaces 29303A)

Used on HKS-700e  Throttle application. Generous adjustable range separate from Carburetor Attach Point.  Uses 29315 Aluminum adjuster (Bonds to 03315 Cable Housing.) Oilite bushing and split nut adapts the 90 to Bing 64 CV carburetors. (Adapts 3/8"OD to 1/4"ID. approximately .100" grip length) Includes items shown. 1/4' x 20 thread.
$16.31 each

Bent Tube Assembly - Bing 64 Choke 861 640

Standard Equipment on Bing 64 CV carburetors as used on Rotax 912 and HKS-700E. Used in conjunction with Green Sky Custom choke cable assy.  Includes items shown. Male threaded end is 6mx.75. also fits top of Bing 54
$47.44 each

Stainless 90 Bend With Nylon Lined Housing

Stainless 90 Bend w Cable
Shown here are a pair of complete assys (sold separately)Our SS bends are combined with our 03315 nylon lined housing for a low friction 90 degree solution. The outter PVC coating is stripped away, and the inner metal jacket and nylon liner extend all the way to the tip of the bend. The entrance of the bend is tapped to except the housing's full OD, and the housing is threaded and bonded into that entrance for a durable water tight fit. At the exit, the SS tube OD is compatible with a variety of adjusters. Shown here is the 6mm adjuster common on Bing Model 54 Carburetors.
HSNG LENGTH 1 - 8 FT


91415 Hex Nut 6m x .75 for 29315 Adjuster. Zink Steel
91415          Hex Nut.  M6 x .75 Zink Steel                            $.53 each
91415-5       Hex Nut.  M6 x .75 Zink Steel      5PK   $2.00    $.40 each
91415-10     Hex Nut.  M6 x .75 Zink Steel    10PK   $3.60    $.36 each
91415-25     Hex Nut.  M6 x .75 Zink Steel    25PK   $8.00    $.32 each

Qnty


91828 Hex Nut 6m x .1 for 27266 Adjuster. 18-8 Stainless Steel
91828          Hex Nut.  M6 x .1 SS                              $.25 each
91828-5       Hex Nut.  M6 x .1 SS      5PK   $0.95    $.19 each
91828-10     Hex Nut.  M6 x .1 SS    10PK   $1.70    $.17 each
91828-25     Hex Nut.  M6 x .1 SS    25PK   $3.75    $.15 each

Qnty

Set Screw End

2361 Wire Eye  6mm Diameter x 8mm Length Barrel for cable up to .100 inch
2361       Wire Eye                        $1.93 each
2361-5    Wire Eye 5PK   $7.30    $1.46 each
2361-10  Wire Eye 10PK $13.10    $1.31 each
2361-25  Wire Eye 25PK $29.00  $1.16 each
QNTY

Fork Ends
 
Strap Fork -3 Stainless
Experimental use for 1/16 and 3/32 cable with 26080 or 26398 Solder on Shank Fitting. Conventional application uses swadged SS Ball Shank
A - 1.500 - B - .550 - C - .188  - D - .050 - E - .437 - F - .125
Strap Fork -3 SS   $3.68 each


Cable Nut Set Screw end with Strap Fork
MORE INFO
Great for Custom Cables. Designing a custom cable involves accurate measurement of a wide variety of ends, fittings, and adjusters.  If replacing an obsolete assembly, available components usually do NOT match the obsolete part exactly. In either case, producing such assemblies is generally time intensive, with high potential for error. By terminating one end with a set screw type connector like the Cable Nut - Strap Fork, the build / design time goes way down, and error potential is about zero.  If you need to purchase a custom cable assembly,  consider using the Cable Nut - Strap Fork. It will reduce build time approximately one hour.
Cable Nut - Strap Fork-3  $18.87 each (includes Strap Fork)


Solder Pot
Mini Solder Pot a low cost means of soldering cable ends for one off assemblies or limited production. Clamp in a vise and heat with torch.
610-Solder
$8.50


01200 Solder Pot - Dip type solder pot to make cables. 110V 200W with 3 wire cord. Quick heat -up, 1-9/16” I.D., 1-1/2” deep.
$187.95


03001 Tinners Fluid Solder Flux. 4 oz  (OR Purchase at Local Hardware)
$11.95


01500 Solder- Solder 50/50 in 1-1/2 lb. bar
$27.95

99999 Solder Pot Kit Includes: SOLDER POT/FLUX/SOLDER shown above
$224.85